by threadedmg | Oct 19, 2022 | Bridge Decks, Commercial/Industrial Slab on Ground, Composite Metal Deck, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, https-fiberforce.us-paving-and-overlays, https-fiberforce.us-topping-slabs, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Macro, Macrosynthetic, Precast, Shotcrete, State DOT, Tunnel Lining
Topical Densifier DuraForce(t) DuraForce(t) is a topically applied, penetrating water-based silicate material that hardens and increases the density and abrasion resistance of concrete surfaces. The formula is chloride-free and recommended for both interior and...
by threadedmg | Oct 19, 2022 | Bridge Decks, Commercial/Industrial Slab on Ground, Composite Metal Deck, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, https-fiberforce.us-paving-and-overlays, https-fiberforce.us-topping-slabs, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Macro, Macrosynthetic, Precast, Shotcrete, State DOT, Tunnel Lining
Hardener & Densifier DuraForce(i) DuraForce(i) is a liquid integral hardener that increases the durability throughout the depth of the slab. It creates additional hydration products which penetrate the multitude of capillaries, therefore hardening the slab during...
by Productions | Oct 3, 2020 | Bridge Decks, Commercial/Industrial Slab on Ground, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Macro, Macrosynthetic, Paving & Overlays, Shotcrete, State DOT
FiberForce 650 General Information FiberForce 650 is a synthetic macrofiber developed from a specific blend of polypropylene and polyethylene resins that possess unique engineering properties. Defined as a tape or ribbon fiber, FiberForce 650 has a rectangular...
by Productions | Oct 3, 2020 | Composite Metal Deck, Interior Heavy Industrial Slab on Ground, Steel Blend
FiberForce 850 General Information FiberForce 850 is a blend of steel macrofibers and synthetic microfibers. FiberForce 850 combines a Type V steel macrofiber with a monofilament microfiber. The specific blend ratio is 23 lb/1 lb (steel macrofiber/synthetic...
by Productions | Oct 3, 2020 | Bridge Decks, Commercial/Industrial Slab on Ground, Composite Metal Deck, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Macro, Macrosynthetic, Paving & Overlays, Precast, Shotcrete, State DOT, Topping Slabs, Tunnel Lining
FiberForce 1000 HP General Information FiberForce 1000 HP is a synthetic macro concrete fiber developed from a specific blend of polypropylene and polyethylene resins that are continuously embossed for enhanced bond. FiberForce 1000 HP has an optimized embossment...
by Productions | Aug 21, 2020 | Commercial/Industrial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Steel, Tunnel Lining
FiberForce T1-60 General Information FiberForce T1-60 is a cold-drawn steel wire fiber which meets the requirements of ASTM A820 Type I. FiberForce T1-60 was developed for use as temperature-shrinkage reinforcement and post-first crack toughness in concrete....
