FiberForce 600

General Information

FiberForce 600 is a blend of synthetic macro/microfibers. FiberForce 600 combines a mechanically embossed tape macrofiber with a monofilament microfiber. The specific blend ratio is 3lb/1lb (macrofiber/microfiber) per 4lb bag. This blended technology is developed for post-first crack reinforcement with enhanced plastic shrinkage/settlement crack control.

Additional Information

FiberForce 600 is packed in pre-weighed degradable bags. FiberForce 600 can be preloaded in empty ready-mix drums or added anytime during or after concrete is batched. Mix for 5 minutes at full charging speed (75-100 revolutions) to ensure complete dispersion of fibers. FiberForce recommends the utilization of the appropriate water reducing chemical admixture for any slump or workability modification that may be required with this technology.

Physical address

Helena Industrial Park
545 Elm Street
Helena, AL 35080

Mailing address

P.O. Box 580
Helena, AL 35080

Send a message