State DOT

The use of fibers in highway, airport, and waterway construction has been a keystone to FiberForce’s success. From Ultra-Thin Whitetopping (UTW) to aprons and taxiways to dams and irrigation canals, synthetic fibers can and do play an important role. Whether the application requires cast-in-place concrete, precast concrete or shotcrete, the three-dimensional reinforcement provided by FiberForce concrete fiber products will always enhance the durability of the concrete. FiberForce has product approvals granted by the following State DOTs: AZ, GA, IA, ILKS, KY (per project), ME, MN, MO (per project), MSNYOHOR, TN, and TX. For California, FiberForce’s custom blended and packaged product Pro Max Blend, meets the CalTrans standard special provision requirements for new bridge decks and PCC overlays.

DuraForce(t)

DuraForce(t)

Cure & SealDuraForce(t)DuraForce(t) is a liquid topical densifier that increases the surface density and abrasion resistance of the concrete slab. Depending on the desired performance, it can also be used as a finishing aid or a topical cure and seal at various...

DuraForce(i)

DuraForce(i)

Hardener & DensifierDuraForce(i) DuraForce(i) is a liquid integral hardener that increases the durability throughout the depth of the slab. It creates additional hydration products which penetrate the multitude of capillaries, therefore hardening the slab during the...

DuraForce(iwp)

DuraForce(iwp)

Integral WaterproofingDuraForce(iwp) DuraForce(iwp) is a proactive liquid additive that waterproofs your concrete from the inside by crystalline growth. Unlike most other waterproofers, DuraForce(iwp) is a liquid which is added via a dispenser instead of powdered...

DuraForce(v-)

DuraForce(v-)

Vapor MitigationDuraForce(v-) DuraForce(v-), MVRA 900 by ISE Logik, is a moisture vapor reduction admixture for use in new concrete that receives flooring, coatings, or roofing. It helps reduce moisture emissions by restricting the capillaries from reaching the...

FiberForce 650

FiberForce 650

FiberForce 650General Information FiberForce 650 is a synthetic macrofiber developed from a specific blend of polypropylene and polyethylene resins that possess unique engineering properties. Defined as a tape or ribbon fiber, FiberForce 650 has a rectangular...

FiberForce 750

FiberForce 750

FiberForce 750General Information FiberForce 750 is a blend of synthetic macrofibers. FiberForce 750 combines a mechanically embossed tape macrofiber with a modified fibrillated macrofiber. The modified fibrillated portion has been engineered so the main fibrils are...

FiberForce 1000 HP

FiberForce 1000 HP

FiberForce 1000 HPGeneral Information FiberForce 1000 HP is a synthetic macro concrete fiber developed from a specific blend of polypropylene and polyethylene resins that are continuously embossed for enhanced bond. FiberForce 1000 HP has an optimized embossment...

Other product types

Physical address

Helena Industrial Park
545 Elm Street
Helena, AL 35080

Mailing address

P.O. Box 580
Helena, AL 35080

Send a message